Table of Contents
Advertisement
Charge the battery
Your phone is powered by a rechargeable battery.
A new battery is partially charged. The battery
symbol indicates the state of the battery. To charge
the battery, plug in the connector as shown below.
Then plug the other end into a power socket.
During charging, the battery symbol scrolls. It takes
about 6 hours to fully recharge the battery.
Depending on the network and condition of use,
talk time goes up to 8.5 hours and stand-by time up
to one month.
Keeping the charger plugged to the mobile
phone when the battery is fully charged will not
damage the battery. The only way to turn off
the charger is to unplug it, so it is advisable to
use an easily accessible power socket.
Getting Started
If you do not intend to use your phone for
several days, we recommend that you remove
the battery.
You can use the phone while it is charging. If
the battery is completely flat, the battery
symbol will only reappear after a few minutes
of charging.
Set your SIM card slots
The first time you turn on your phone, you may
need to set the two SIM card slots.
To identify the two SIM cards, you can set different
names, ringtones, message alerts, and icons for
them.
1.
Check the Slot 1 and Slot 2 for the SIM cards
(see Step 3 in "Insert SIM cards").
2. Check that your phone is switched on.
Long press ) if necessary. Enter the PIN
code if required. A PIN code is a 4- to 8-digit
secret code of
preconfigured and communicated to you by
your network operator or retailer.
If you enter an incorrect PIN code three times
in succession, your SIM card will be blocked. To
your SIM card.
It is
7
Advertisement
Table of Contents
