Advertisement
DISMANTLING INSTRUCTIONS
Dismantling of the Front Panel Assembly
1) Loosen 13 screws and remove the
rear portion upwards before sliding it out towards the rear
- 7 screws on the rear
- 6 screws each on the left & right side
2) Loosen 1 screws C1 Pull out holder C2. (see figure1)
3) Loosen 5 screws A and each side 2 screws A-1 for
wire tags & cut 2 wire ties, then remove the front
pannel. (see figure2)
A-1
3-1
Top Cover by lifting the
Screw(C1)
.
Figure 1
A
Figure 2
holder(C2)
A-1
Advertisement
