Philips MX5000D/22S Service Manual page 14

Dismantling of the DVD Module / shield bracket B1
1) Loosen screws D3 of botton chassis figure3.
Screw K1
Dismantling the Power Amplifier Module
1) Pull out connected wires and Loosen 1 screws (see figure 6). 2) Loosen 10 screws on the Rear Panel
Screw D3
Figure 3
B1
B
Figure 4
3-2
2) Loosen 5 screws B and remove the B1. (figure 4)
3) Loosen 4 screws D (see figure 5) and 2 screws D1,
then all connectors to remove the DVD module.
- 4 screws K for the Speaker sockets (see figure7)
- 4 screws K for the heat sink.
- 2 screws K1 for the bottom chassis.(see figure 3)
D1
D
Figure 5
Figure 6