Download Print this page

Philips MX5000D/22S Service Manual page 48

Dvd surround receiver

Advertisement

Procedure to enter Service Mode: (After B/E firmware upgrade)
Step 1. Press OPEN button to open Tray DISC1
Step 2. With the Remote Control press [CLEAR] [2] [5] [8] [0] [CLEAR] buttons in sequence
where CLEAR = Press & hold STOP button down till the INVALID Logo disappears on the TV screen
TVscreen shows:
-/37 version
BE VER
MXKI0005
FE VER
/
33-680111
BUILD TIME
020814
1
EEPROM DATA
00 - 4D 58 4B 49 30 30 30 35
08 - FF FF FF FF 22 21 01
Note:
B/E version = Back End (Buyer model version) version
F/E version = Front end (Mechanism Firmware) version
Step 3. Press STOP button to clear the EEPROM
Step 4. Change address 13, 14, 15.
- 37 Version : 22 21 01
- 37 Version : 35 33 02
Step 5. Press two times RETURN button to exit Service mode
- The Set display will shows: END and the Versions information on the TV screen disappears.
Procedure to upgrade Firmware (Software):
Upgrading of B/E Firmware
Step 1. With the Remote Control enter the Service Mode
Step 2. Place CD-R disc with new firmware onto Tray
Step 3. Press PROGRAM button
TV screen will shows:
-
ERASE >>>>>>>>>>>>
-
WIRTE >>>>>>>>>>>>
-
DONE
Step 4. Switch the Mains supply off and on again.
Step 5. Press OPEN button to remove CD-R disc from Tray DISC1
Step 6. Enter the Service Mode and clear the EEPROM.
The set firmware is now fully upgraded.
Upgrading of F/E Firmware
Step 1. Press Open button to open Tray DISC1
Step 2. Place CD-R disc with new software onto Tray
Step 3. With the Remote Control press PLAY button
- The set will start loading the new firmware
- NO DISC will be display on the Set display after about 30 seconds
The set will start loading the new firmware
NO DISC will be display on the Set display after about 30 seconds
Step 4. Switch the Mains supply off and on again.
Step 5. Press OPEN button to remove CD-R disc from Tray DISC1
Warning: Do not switch the Mains supply off during the Firmware Upgrading.
8-2
- B/E version
- F/E version
- B/E bulid time
- Region Number
-/22 version
BE VER
MXKI0005
FE VER
/
33-680111
BUILD TIME
020913
2
EEPROM DATA
00 - 4D 58 4B 49 30 30 30 35
08 - FF FF FF FF 35 33 02
- B/E version
- F/E version
- B/E bulid time
- Region Number

Advertisement

loading

This manual is also suitable for:

Mx5000d/37s