Care And Cleaning; Troubleshooting - Electrolux EHG6341FOK User Manual

12 www.electrolux.com
Information on acrylamides
Important! According to the newest
scientific knowledge, if you brown food
(specially the one which contains starch),

6. CARE AND CLEANING

Clean the appliance after each use.
Always use cookware with clean bottom.
To remove the dirt:
1.

7. TROUBLESHOOTING

You cannot activate the
appliance or operate it.
An acoustic signal
sounds and the appliance
deactivates.
An acoustic signal
sounds when the appli-
ance is deactivated.
The appliance deacti-
vates.
DeluxeAppliances - EUappliances.com
Scratches or dark stains on the
glass-ceramic cause no effect on
how the appliance operates.
– Remove immediately: melted
plastic, plastic foil, and food with
sugar. If not, the dirt can cause
damage to the appliance. Use a
special scraper for the glass . Put
the scraper on the glass surface at
Problem
acrylamides can pose a health risk. Thus,
we recommend that you cook at the
lowest temperatures and do not brown
food too much.
– Remove after the appliance is
2. Clean the appliance with a moist cloth
and some detergent.
3. At the end rub the appliance dry
with a clean cloth.
Possible cause
You touched 2 or more
sensor fields at the same
time.
The STOP+GO function
operates.
There is water or fat
stains on the control pan-
el.
You put something on
one or more sensor fields.
You put something on the
sensor field .
an acute angle and move the blade
on the surface .
sufficiently cool: limescale rings ,
water rings, fat stains, shiny metal-
lic discolorations. Use a special
cleaning agent for glass ceramic or
stainless steel.
Remedy
Activate the appliance
again and set the heat
setting in less than 10
seconds.
Touch only one sensor
field.
Refer to the chapter "Dai-
ly Use".
Clean the control panel.
Remove the object from
the sensor fields.
Remove object from the
sensor field.