Ford F-650 Owner's Manual page 195

Hide thumbs Also See for F-650:
Table of Contents

Advertisement

thermostat is open and coolant is
flowing through the radiator).
Secondary cooling system: Repeat
Step 5 until the coolant level has
stabilized (is no longer dropping after
each step) AND the lower passenger
side of the secondary radiator is
warm to the touch (indicating
secondary thermostat is open and
coolant is flowing through the entire
system).
11.
Reinstall the pressure relief cap. Shut
the engine off and let it cool.
12.
Check the coolant level in the
reservoir before you drive your vehicle
the next few times (with the engine
cool).
13.
If necessary, add prediluted engine
coolant to the coolant reservoir until
the coolant level is within the COLD
FILL RANGE as listed on the reservoir.
After any coolant has been added,
check the coolant concentration. See
Adding Engine Coolant earlier in
the chapter for more information.
Whenever coolant has been added, the
coolant level in the reservoir should be
checked the next few times you drive the
vehicle. If needed, add prediluted engine
coolant to bring the coolant level to the
proper level on the reservoir.
Recycled Engine Coolant
Ford Motor Company does not recommend
the use of recycled engine coolant since a
Ford-approved recycling process is not yet
available.
Used engine coolant should be disposed
of in an appropriate manner. Follow your
community's regulations and standards
for recycling and disposing of automotive
fluids.
F650750 (TBC), enUSA, First Printing
Maintenance
Severe Climates
If you drive in extremely cold climates:
It may be necessary to have a Ford
authorized dealer increase the coolant
concentration above 50%.
A coolant concentration of 60% will
provide improved freeze point
protection. Engine coolant
concentrations above 60% will
decrease the overheat protection
characteristics of the engine coolant
and may cause engine damage.
If you drive in extremely hot climates:
It may be necessary to have a Ford
authorized dealer decrease the coolant
concentration to 40%.
A coolant concentration of 40%
provides improved overheat protection.
Engine coolant concentrations below
40% will decrease the freeze and
corrosion protection characteristics of
the engine coolant and may cause
engine damage.
Vehicles driven year-round in non-extreme
climates should use prediluted engine
coolant for optimum cooling system and
engine protection.
Coolant Change
At specific mileage intervals, as listed in
the scheduled maintenance information,
the coolant should be changed. The
optional information display, if equipped,
will also display a message to change
coolant at this time.
Add coolant meeting the Ford
specification. See Capacities and
Specifications (page 256).
192
I n f o r ma t i o n P r o v i d e d b y :

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

F-750

Table of Contents