[Adjustment] 0-J100 Position Adjustment - Pentax K10D 76830 Service Manual

23. [Adjustment] Positioning 0-J100
[Required equipment] Penlight or equivalent
*Adjustment and confirmation are the same as K100D. Refer to the service manual of 76700.
① [Confirm] Tolerance
Center position of sensor
Tolerance:0.25～0.85mm
Center position of Viewfinder
Photo sensor (0-J100)
AF frame for spot metering (φ2.5)
② Adjust the position.
③ Apply the bond/Screw lock as shown in figure.
③
Bond
J100
③
SL M15
②
ADJ.
42