Preparation; Preparation For Adjustment - Pentax K10D 76830 Service Manual

PREPARATION

The following preparations are required before disassembling and assembling the camera.
1. Prepare the Jigs, tools and testers. (Refer to the Table of Jigs, tools and testers.)
2. Make the preparation with referring next section of "Preparation of adjustment".
Preparation of Adjustments
[Required equipment]
Programmed software for 76830 (Supply with CD-ROM)
Computer (PC)
SD card 3 pieces (16MB or above)
SD card reader or USB cable (I-USB17) ... For connecting with PC
1. Prepare SD card (3 pcs) for confirming adjustment
Prepare SD card (3pcs).
(1) For product FW (Firmware) of K10D
(2) For updating FW for customer
(3) For writing initialize data
2. Setting for computer and prepare the SD card
*Set the Programmed software for 76830 in the CD-ROM drive.
(1) Copy the five holder from the Programmed software contained in the CD-ROM to [C: drive] as shown in
below.
[76830]: For Digital adjustment
[76830 Initial Data Set]: For writhing initial data
[76830 SLR]: For SLR function adjustment
[76830 SR Gain Adjustment]: For SR gain adjustment
[76830 SR Operation Adjustment]: For SR unit adjustment
(2) Copy the file [GM_FW] to the SD card from [76830] holder. (For product FW)
*Use the latest version of firmware. (The file name is "kb421b.bin".)
(3) Copy the file [DL_FW] to the SD card from [76830] holder. (For updating FW)
*Use the latest version of firmware. (The file name is "fwdc162b.bin".)
(4) Copy two files in the [Initial Data Set] folder to SD card (For writing initial data)
(5) Complete the setting of [Set up the VB run time] (carry out by K100D or *istDL2)
*Refer to the K100D service manual for details.
(6) Execute [3. Calibration of light source for Digital adjustment]
2