Section 1: Introduction - Elo Touch Solutions 01 series User Manual

Section 1: Introduction

Product Description
Your new Interactive Digital Signage (IDS) touchmonitor combines Elo Touch Solutions reliable performance with
the latest developments in touchscreen technology and display design. This combination of features creates a
natural flow of information between a user and the touchmonitor.
This touchmonitor incorporates a 24-bit color, active matrix thin-film-transistor, and digital signage LCD panel to
provide superior display performance. Its Full HD resolution of 1920x1080 is suitable for displaying graphics and
images. Other features that enhance this LCD monitor's performance are Plug & Play compatibility, built-in
speakers and headphone output capability, and a remote for on screen display (OSD) controls.
Computer modules designed specifically for this touchmonitor are available. These computer modules are
designed to slide into a bay on the rear of the monitor and turn your IDS touchmonitor into an IDS All-in-One
touchcomputer without affecting monitor form factor and without requiring extra cabling.
Precautions
Follow all warnings, precautions and maintenance as recommended in this user manual to maximize the life of your
unit and prevent risks to user safety. See Section 6 for more information on touchmonitor safety.
For your health and safety, it is strongly recommended that at least two people (four for the ET7001L/ET7001LT)
handle, lift, and/or move these touchmonitors.
This manual contains information that is important for the proper setup and maintenance of the IDS and optional
computer module. Before setting up and powering on your new touchmonitor and computer module, read through
this manual, especially the Installation, Mounting, and Operation chapters.
User Manual – IDS01 SW601990 Rev. M,, page 4 of 47