Table of Contents
Advertisement
Section 6: Safety & Maintenance
Safety
•
To avoid risk of electric shock, follow all safety notices and do not disassemble the touchmonitor. They are not user-serviceable.
•
The slots located on the sides and top of the touchmonitor case are for ventilation. Do not block or insert anything inside the ventilation slots.
•
The touchmonitor ships with a 3-wire, grounding power cord. The power cord plug only fits into a grounded outlet. Do not fit or
modify the plug into an outlet that has not been configured for this purpose. Do not use a damaged power cord. Only use the
power cord that came with your ELO touchmonitor. Use of an unauthorized power cord may invalidate touchmonitor warranty.
•
Ensure that your installation allows touchmonitor to meet specified environmental conditions listed in Section 7.
Care and Handling
The following tips will help keep your touchmonitor functioning at an optimal level:
•
Disconnect the AC power cable before cleaning.
•
To clean the display unit cabinet, use a clean cloth lightly dampened with a mild detergent.
•
It is important that your unit remains dry. Do not get liquids on or inside the unit. If liquid does get inside,
turn the unit off and have a qualified service technician check it before you power it on again.
•
Do not wipe the screen with a cloth or sponge that could scratch the surface.
•
To clean the touchscreen, use window or glass cleaner applied to a clean cloth or sponge. Never apply the cleaner directly to
the touchscreen. Do not use alcohol (methyl, ethyl or isopropyl), thinner, benzene, or other abrasive cleaners.
•
Ensure the environmental conditions (i.e. temperature and humidity) are maintained within specification and do no block ventilation slots.
•
Monitors are not designed for outdoor use.
User Manual – IDS01
SW601990 Rev. M,, page 29 of 47
Advertisement
Table of Contents
