Fig. 912 Replacing Nozzle Holder, Nozzle Holder Pre-Heating Unit, High-Pressure Nozzle And Flame Monitor - Webasto DBW 2010 Workshop Manual

9 Repair
NOTE
The parts marked with * are not present with
single-line fuel pumps.
1 Solenoid valve
2 Heating cartridge
3 Clamping yoke
4 Ignition cable (2)
5 Retaining clip (2)
6 Clip
7 Washer
8 Screw
9 Ignition electrode (2)
10 Flame monitor

Fig. 912 Replacing nozzle holder, nozzle holder pre-heating unit, high-pressure nozzle and flame monitor

915
Visit www.butlertechnik.com for more technical information and downloads.
11 High-pressure nozzle
12 Disc
13 Snap ring
14 Screw
15 Nozzle holder
16 Pressure line
17 Screw (2)
18 Washer (2)
19 Fuel pump
20 Fuel line (2)
www.butlertechnik.com
DBW 2010 / 2016
21 Washer (4)
22 Banjo bolt (2)
23 Screw (4)
24 Nozzle holder plate
25 Spur gear
26 Circlip
27 Screw (2)