Suggestions For Improvement And Change - Webasto DBW 2010 Workshop Manual

1 Introduction
All fuel tanks offered in the Webasto accessories catalogue
are individually subjected to a pressure test of at least 0.3 bar
gauge pressure at the factory.
• The respective operating mode of the heater, at least
switched on or off, must be easily recognisable.
For heaters in vehicles not subject to the German Road Vehicle
Licensing Act (StVZO), approval by the respective test facility
is required – provided there are applicable regulations.
1.7 Suggestions for improvement and
change
Complaints, improvements or suggestions for correction to
this technical manual should be directed to Webasto.
104
Visit www.butlertechnik.com for more technical information and downloads.
www.butlertechnik.com
DBW 2010 / 2016