Mixing; Steer Mix; 4Ws (4-Wheel Steering); Servo (Dual Steering) - Spektrum DX5R Instruction Manual

EN
FUNCTION lIST

MIxING

The DX5R features preset steering and throttle mixes and four programmable mixes. If AVC
active, only two channels, Steering and Throttle, are operational. The Aux channels can be used to power a
personal transponder, lights, etc.
If AVC technology is disabled (see Disabling the Stability Assist Function to disable AVC), the Aux channels will
operate as servo channels. Aux channels are not available for use in mixes when AVC is active.

STEER MIx

Use the Steer Mix for vehicles requiring either four-wheel steering (4WS) or dual steering servos (Dual ST).

4WS (4-WhEEl STEERING)

1. Select STEERING and click the scroll wheel.
2. Select 4WS and click the scroll wheel.
3. To activate, select Inhibit and scroll to select STR > AUX1.
• Select AUX1, AUX2 or AUX3 as the Slave** channel.
• The AUX channels can only be assigned to one mix at a time. If AUX1, AUX2 or
AUX3 is assigned to another mix, it will not be available as a slave channel option.
4. Select Trim to Act or Inh (Default). When Trim is Active, adjustments to the steering
trim affect both front and rear steering channels.
5. Select Switch to Assign the 4-Wheel Steering Options to a switch to select steering
options. Each time you move the switch, the 4-Wheel Steering options appear on
the Main Screen.
*Slave Channel (AUx) Example:100% means the slave channel movement is equal
to the master channel movement. If you adjust the value to 50%, the slave channel
moves half as far as the master channel. A negative value means the mix moves in the
opposite direction.

2 SERvO (DUAl STEERING)

1. Select STEERING and click the scroll wheel.
2. Select 2 SERVO and click the scroll wheel.
3. To activate, select Inhibit and scroll to select STR > AUX1.
• Select AUX1, AUX2 or AUX3 as the Slave** channel.
• The AUX channels can only be assigned to one mix at a time. If AUX1, AUX2 or
AUX3 is assigned to another mix, it will not be available as a slave channel option.
*Slave Channel (AUx) Example:100% means the slave channel movement is equal
to the master channel movement. If you adjust the value to 50%, the slave channel
moves half as far as the master channel. A negative value means the mix moves in the
opposite direction.
12
technology is
®
Spektrum DX5r • tranSmitter inStruction manual