Before You Call For Service - LG HOM-BOT VHOMBOT* Owner's Manual

BEFORE YOU CALL FOR SERVICE

Check the following before calling for service.
Problem
The HOM-BOT will not activate.
Movements or travel path are
abnormal.
Suction power becomes weak.
Noise becomes louder.
The HOM-BOT cannot be activat-
ed with the remote control.
The brush does not rotate.
The HOM-BOT will not charge.
The power supply automatically
turns off.
The power supply cannot be
turned on.
29
Solutions (Reference page)
Confirm that the battery has been charged. (page 17)
Carefully wipe the sensor with a smooth cloth. (page 24)
Turn on the power switch off and on.
Check whether there is foreign material blocking the suction port.
(page 23
Empty the dust bin. (page 21)
Clean the dust bin filter. (page 22)
Confirm that the dust bin has been mounted properly.
Confirm that the dust bin filter has been mounted properly. (page 22)
Check whether foreign material is caught in the brush. (page 23)
Replace the remote control batteries. (page 11)
Confirm that the control is within the coverage area of the main frame,
which is less than 3 m or 9.84 ft. (page 11)
Clean the brush. (page 23)
Remove objects around the home station. (page 13)
Confirm that the power supply is connected to the home station. (page 13)
Wipe the charging terminal with a dry cloth.
This is not a failure. HOM-BOT has its own power saving function. If it is
not used for ten minutes after the power supply is turned on, the power
will automatically turn off.
Check that the power switch is turned on. (Page 14)
23