Replacing the hard-drive cage
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Align the tabs on the hard-drive cage with the slots on the chassis and slide the
hard drive in place.
2
Replace the screws that secure the hard-drive cage to the chassis.
3
If applicable, connect the power and data cables to the secondary hard-drive.
Post-requisites
1
Replace the
primary
2
Replace the
computer
52
computer. After working inside your computer, follow
After working inside your
hard-drive.
cover.
computer. For more safety best
www.dell.com/
Before