Set Up The Model Option - Samsung SC09AWH Service Manual

4. Set Up the Model Option

4-1 Setting Option Setup Method
Step 1 : Enter the Option Setup mode.
1 st Take out the batteries of remote control.
2 nd Press the temperature
insert the battery again.
3 rd Make sure the remocon display shown as
Step 2 : Enter the Option Setup mode and select your option according to the following procedure.
3
1,4 2,5
14
ex) Option No. :
button simultaneously and
Feature
1
Setting Option SEG1.
Push the button to set the display panel to
Every time you push the button, the display panel reads
. . .
2
Setting Option SEG2.
Push the button to set the display panel to
Every time you push the button, the display panel reads
. . .
3
Change it into the set display of Option SEG3 and SEG4
with the button.
4
Setting Option SEG3.
Push the button to set the display panel to
Every time you push the button, the display panel reads
. . .
5
Setting Option SEG4.
Push the button to set the display panel to
Every time you push the button, the display panel reads
. . .
.
.
repeatedly.
.
repeatedly.
.
repeatedly.
.
repeatedly.
Display
Samsung Electronics