Safety Precautions The following safety precautions must be taken when using your air conditioner. WARNING URING OPERATION ISPOSING OF THE UNIT THERS • Can cause injury or death. • Disconnect all Risk of electric shock. remote electric power supplies before servicing, installing or cleaning. •...
View of the Unit The design and shape are subject to change according to the model. Indoor Unit Air filter Air Inlet (under the grille) Air flow blades (outlet) Operation indicator Remote Control Sensor (Green) On/Off button Turbo indicator (Green) Timer indicator (Orange)
Remote Control - Buttons and Display Remote control transmission indicator Operating mode AUTO, DRY, Temperature setting Turbo mode Sleep mode Energy saving Fan speed Air flow direction On Timer setting Off Timer setting Battery discharge indicator Energy Saving button COOL, FAN) Mode selection button (AUTO, COOL, DRY, FAN)
etting Started You have just purchased a split type air conditioner and it has been installed by your installation specialist. Your Owner’s Instructions contains valuable information on using your air conditioner. Please take the time to read it as it will help you take full advantage of the unit’s features.
Inserting the Remote Control Batteries You must insert or replace the remote control batteries when : ◆ You purchase the air conditioner ◆ The remote control does not work correctly ◆ Use two AAA, LR03 1.5V batteries. ◆ Do not use old batteries or different kinds of batteries together. ◆...
Selecting the Automatic Operating Mode You can start the air conditioner in Automatic mode from your remote control. In the Automatic mode, the standard temperature and the optimum fan speed is selected automatically. You can adjust the standard temperature but not the fan speed. If necessary, press the (On/Off) button.
Cooling Your Room You must select the Cool mode if you wish to adjust the: ◆ Cooling temperature ◆ Fan speed when cooling If necessary, press the (On/Off) button. ◆ The operation indicator on the indoor unit lights up. Result: ◆...
Changing the Room Temperature Quickly The Turbo cooling function is used to cool your room as quickly as possible. You have just come home and find that the room is very hot. You wish to cool it down as quickly as possible. The Turbo function operates for 30 minutes with the maximum settings before returning automatically to the mode and temperature previously selected.
Removing Excess Humidity If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much. If necessary, press the (On/Off) button. ◆ The operation indicator on the indoor unit lights up. Result: ◆...
Airing Your Room If the atmosphere in your room is stale, you can air the room using the Fan feature. If necessary, press the (On/Off) button. ◆ The operation indicator on the indoor unit lights up. Result: ◆ The air conditioner starts up in the mode selected when the unit was last used.
Selecting Energy Saving Mode If you wish to save energy when using your air conditioner, select the Energy saving mode with the Energy Saving button. If necessary, press the (On/Off) button. ◆ The operation indicator on the indoor unit lights up. Result: ◆...
Adjusting the Air Flow Direction Vertically Depending on the position of the indoor unit on the wall of your room, you can adjust the position of the outer air flow blade on the bottom of the unit, thus increasing the efficiency of the air conditioner.
Setting the On Timer The On Timer enables you to switch on the air conditioner automatically after a given period of time. You can set the period of time from 30 minutes to 24 hours. To set the operating time, press the the required time is displayed.
Setting the Off Timer The Off Timer enables you to switch off the air conditioner automatically after a given period of time. You can set the period of time from 30 minutes to 24 hours. To set the operating time, press the the required time is displayed.
Setting the Sleep Timer The Sleep Timer can be used when you are cooling your room to switch the air conditioner off automatically after a period of 6 hours. If you wish to switch the unit off at a specific time, refer to page 17.
Operating Recommendations Here are a few recommendations that you should follow when using your air conditioner. Topic Recommendation Power failure If a power failure occurs when the air conditioner is operating, the unit is switched off. When the power returns, the air conditioner starts up again automatically.
Temperature and Humidity Ranges The following table indicates the temperature and humidity ranges within which the air conditioner can be used. If the air conditioner is used at... High temperatures Low temperatures High humidity levels Mode Outdoor Temperature Cooling 21°C to 43°C approx. Drying 18°C to 43°C approx.
Operating Your Air Conditioner Without the Remote Control Your air conditioner can be operated directly from the indoor unit if the remote control is lost or broken. To turn the air conditioner on, press the On/Off button on the right side of the indoor unit.
Solving Common Problems Before contacting the after-sales service, perform the following simple checks. They may save you the time and expense of an unnecessary call. Problem The air conditioner does not operate at all The air conditioner does not operate with the remote control No beep is heard when you press (On/Off) on the remote control...
Cleaning Your Air Conditioner To get the best possible use out of your air conditioner, you must clean it regularly to remove the dust that accumulates on the air filter. Before cleaning your air conditioner, ensure that you IMPORTANT have switched off the breaker used for the unit. Press the right and left marks of the front grille pushing it.
Page 24
THIS AIR CONDITIONER IS MANUFACTURED BY: ELECTRONICS Printed in Korea...