Set Up The Model Option; Troubleshooting - Samsung WALL MOUNTED TYPE Technical Manual

6

Set up the Model Option

If you make the replacement of the ASS'Y CONTROL-IN or MAIN PCB ,
Be sure to be set up the model option as follow the steps
Remote controller operation
method as per the step
1st step
Method)
1 Remove the battery of
remote controller
2 Press the temperature
raise/down key simultane-
ously
3 Insert the battery again
(Result)
If the screen of remocn dis-
plays as shown in the right,
go to the second step
2nd step
Method)
If the first digit of LCD is 0
on the remocon screen, go
to the 3rd step.
If it is 1, press the mode
key once to change to 0
and go to the 3rd step.
3rd step
Method)
Press the marked key to
input the option number.
example) 021E31
Result)
Go to 4th step if it displays
as shown in the right
(The number increases
from 1~9, and A, b, C, d, E,
F whenever pressing the
key.)
Applicable key Display status
134

Troubleshooting