Pioneer MRX-5 Advanced Manual page 24

When you cannot connect to a network
∫
via Wi-Fi
0 If this unit is connected by both an ethernet
cable and Wi-Fi to the access point, the
ethernet connection is prioritized. The
connection switches to Wi-Fi when you
disconnect the ethernet cable. (MRX-3 only)
0 If the device being used (wireless LAN router,
etc.) is too far from the unit, or if there is an
obstacle between them, improve the Wi-Fi
performance by closing the distance between
them, for example.
0 Avoid using devices that generate
electromagnetic waves, such as a
microwave.
0 If your Wi-Fi network covers areas near
devices that generate electromagnetic
waves, keep the unit away from these areas.
Firmware update does not complete
∫
successfully
If you updated the unit from an app, if an error
code is displayed on the screen of the app or the
Wi-Fi indicator on the unit lights red, the update
did not complete successfully. Press STANDBY/
EN
24