Pioneer MRX-5 Advanced Manual page 23

standby, press and hold STANDBY/ON for at
least 3 seconds.
When the power of other units cannot
∫
be turned on with the app
To turn on Pioneer devices connected to the
same network as this unit using the app, you first
need to enable the network standby settings on
those devices.
When Wi-Fi settings can't be made with
∫
the app
If the volume of the device where the app is
installed is low or if sound effects are set to on, it
may not be possible to set properly. Try
increasing the volume or turn the sound effects
off.
Unable to access the network (MRX-5
∫
only)
Select "Device Setup" on the app and
reconfigure the network settings.
EN
( 4)
23