Installation
3. Removal Procedures
Step
Action
1
Loosen the installation fasteners (4) from the GP unit.
2
Remove the GP unit slowly from the panel while pressing the
projections on the top of the GP unit.
Note :
• You could damage the GP unit if you try and remove it
without holding down the projections.
• Watch your fingers so they do not get caught when holding
down the projections.
RISK OF INJURY
Do not drop the GP unit when you remove it from the panel.
• Hold the GP unit in place after removing the fasteners.
• Use both hands.
Failure to follow the instruction can result in injury or equipment
damage.
24
(1)
(1) projections
CAUTION
(1)