Hooking Up The Tv/Vcr - Philips CCC133 Owner's Manual

D.
Hooking Up Your TV/VCR to Another Video Source
(VCR, DVD Player, Camcorder, etc.)
You may need this connection if you want to copy tapes or view tapes or discs that you are playing on the
VCR, camcorder, or DVD Player. Select channel 00 (A/V IN) at the TV/VCR when viewing tapes or discs
that are playing on the VCR, camcorder, DVD Player, etc. Details are on page 31.
AUDIO/VIDEO OUT
Jacks on VCR (example)
3CH
IN
4CH
AUDIO VIDEO
ANT.
OUT
OUT
IN
2
When all other connections are complete, plug in the TV/VCR's power cord.
3
Before you turn on the TV/VCR, go to page eight.
• Before connecting an antenna or cable signal to the ANT(enna) Jack, make sure the pin is not bent. If the pin is
bent, straighten it as illustrated, then connect the antenna or cable signal to the ANT(enna) Jack.
• A rod antenna (not supplied) is available from Philips Service Solutions Group. The part number is 4835 303
37006. To order, call 1-800-851-8885. (This antenna will fit the CCC133 only.)
• Audio and video cables are not supplied.
Crooked Pin
Cable
Hooking Up the TV/VCR (cont'd) 7
Connect an Audio cable to the AUDIO
OUT Jack on the VCR and to the AUDIO In
Jack on the front of the TV/VCR.
3CH
IN
4CH
AUDIO VIDEO
ANT.
OUT
OUT
IN
Connect a Video cable to the VIDEO OUT Jack on the
VCR and to the VIDEO In Jack on the front of the TV/VCR.
Helpful Hints
Bent pin
Straight Pin
Plug
CCC133
AUDIO VIDEO
AUDIO VIDEO
EARPHONE
AUDIO/VIDEO In Jacks
on front of TV/VCR
STOP REW PLAY F.FWD REC CHANNEL VOLUME POWER
EJECT OTR