Philips CCC133 Owner's Manual page 44

44 SmartLock (cont'd)
To change the access code, follow these steps.
1
Press the MENU button.
SMARTLOCK
> PRESS B
REVIEW
EXIT
PRIM. SETUP
VCR PROGRAM
VCR SETUP
2
Press the PLAY/ button or the STOP/
SMARTLOCK. Then, press the F.FWD/B button.
SMARTLOCK
_ _ _ _
Enter Your Access Code
3
Use the Number buttons to enter your old access code.
The default code is 0711. If you have never set up your personal
access code, use 0711 now.
After you enter the code, the SMARTLOCK menu will appear.
SMARTLOCK
X X X -
Enter Your Access Code
4
Press the PLAY/ button or the STOP/
CHANGE CODE. Then, press the F.FWD/B button.
SMARTLOCK
BLOCK
CHANGE CODE
>
SELECT KL CHOOSE B
TO END PRESS EXIT
5
Use the Number buttons to enter your desired access code
in the New Code space. Then, enter the same code in the
Confirm Code space.
Your new access code should be recorded. You will return to the
SMARTLOCK menu.
_ _ _ _
New Code
_ _ _ _
Confirm Code
6
Press the STATUS/EXIT button.
1
5
3
button to select
button to select
• To protect the privacy of the access
code, an X will appear on the screen
instead of the number you enter.
• If a "Wrong Code..." message
appears on the screen after you com-
plete step 5, you entered the wrong
numbers in the Confirm Code space.
Enter the new code again, then enter
the exact same code in the Confirm
Code space.
• You cannot use the default code after
you set up your personal access code.
• If a power failure occurs, the default
code, 0711, will be the active access
code again.
• If you connect the power cord to an
AC outlet that is controlled by a wall
switch, your personal access code will
be erased every time you turn off the
power at the wall switch. The default
code will be the active code again.
6 2,4
EJECT
POWER
MENU STATUS/EXIT CLEAR
1 2 3
4 5 6
7 8 9
SLEEP/
ALT.CH
WAKE UP
0
REC PAUSE
/OTR
/STILL
PLAY
REW F.FWD
STOP
CH. VOL.
MUTE
FM
SPEED F.ADV
TRACKING MEMORY SLOW
Helpful Hints