Automatic Channel Setup - Philips CCC133 Owner's Manual

10 Automatic Channel Setup

Although the TV/VCR may automatically memorize the channels
you receive when you turn it on for the first time, you may set up
channels again by following the steps below.
1
Press the MENU button.
PRIM. SETUP PRESS
> B
VCR PROGRAM
VCR SETUP
CAPTION
REMINDER
BRIGHTNESS
2
Press the PLAY/ button or the STOP/
PRIM. SETUP, then press the F.FWD/B button.
PRIMARY SETUP
SELECT LANGUAGE
>
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR [ON]
SET CLOCK
SELECT KL CHOOSE B
TO END PRESS EXIT
3
Press the PLAY/ button or the STOP/
AUTO PROGRAMMING, then press the F.FWD/B button.
AUTO CH PROGRAMMING ... will appear on the screen. The
TV/VCR distinguishes between TV channels and cable channels auto-
matically, and the TV/VCR will memorize its available channels.
4
Wait for a few minutes. When setup is complete, CHANNELS
ARE SET will appear on the screen. Then the programming of the
lowest channel number will appear on the screen. Now, when you
o p
press the CH(annel) /
channels you receive. You can still select non-memorized channels
using the Number buttons.
button to select
button to select
buttons, you will scan only through
2-3
EJECT
POWER
1
MENU STATUS/EXIT CLEAR
1 2 3
4 5 6
7 8 9
SLEEP/
ALT.CH
WAKE UP
0
REC PAUSE
/OTR
/STILL
PLAY
REW F.FWD
STOP
CH. VOL.
MUTE
FM
SPEED F.ADV
TRACKING MEMORY SLOW
4 Wait for the TV/VCR to set up
channels.
Helpful Hints
• Line Input mode will always be
channel 00. You cannot delete it.
• You can not select AUTO PRO-
GRAMMING at step 3 if you are in
Line Input mode.