Philips CCC133 Owner's Manual page 35

Checking or Clearing Timer Recordings
1
With the TV/VCR on, press the MENU button.
2
Press the PLAY/ button or the STOP/
VCR PROGRAM, then press the F.FWD/B button.
3
Press the PLAY/ button or the STOP/
PROGRAM REVIEW, then press the F.FWD/B button.
The timer recording information for the program in the lowest
numbered position will appear on the screen. If no timer record-
ings are programmed, nothing will happen when you select PRO-
GRAM REVIEW and press the F.FWD/B button.
4
Press the F.FWD/B button to display information about the
next timer recording. (If you do not press a button within 10 sec-
onds, information about the next timer recording will appear auto-
matically.) This will continue until all positions have been displayed.
Then, the menu will disappear. You can exit the Program Review at
any time by pressing the STATUS/EXIT button.
5
To cancel the timer recording displayed, press the
CLEAR button. Either the display will disappear or information
about other timer recordings will appear. If you do not press any
other buttons, the display will disappear after all timer recordings
have been displayed.
6
Repeat steps 1-4 to make sure you cleared the correct
recording.
Timer Recording (cont'd) 35
1
button to select
button to select
• With ShowGuard, you don't have to
worry about losing your timer
recordings. If the power fails, timer
recordings will be restored when the
clock is reset. (The clock will reset
itself automatically if you are using
AUTO CLOCK. Details are on pages
14-17. If you are not using AUTO
CLOCK, reset the clock manually.
Details are on pages 12-13.) The
timer recording will not occur only if
it was scheduled to take place
during the power failure.
5 2-4
EJECT
POWER
MENU CLEAR
STATUS/EXIT
1 2 3
4 5 6
7 8 9
SLEEP/
ALT.CH
WAKE UP
0
REC PAUSE
/OTR /STILL
PLAY
REW F.FWD
STOP
CH. VOL.
MUTE
FM
SPEED F.ADV
TRACKING MEMORY SLOW
Helpful Hint