Operating The Phantom; Led Indicator - Phantom PMR-GP1 Operating Manual

GP HH

Operating the Phantom

+
TM
The Phantom's controls are hidden behind a security cover.
Remove the cover using the included Phillips head screwdriver
and hold on to those screws.
Two buttons and one 3-color LED are used to program your
Phantom. The factory default settings will work well for almost
any situation, and you can adjust them to suit your needs using
the provided Phantom Tool.
Button conventions:
Press a button one time briefly and you will see the current setting for
that function. Press the button briefly again within 10 seconds and
you will cycle to the next setting. Continue tapping the button briefly
and you will cycle through all the possible settings. When you get to
your desired setting simply stop there and your setting is saved. Set-
tings are always saved when the Phantom is powered down.

LED Indicator:

The 3-color LED lights green when the Phantom is connected
to phantom power and the mic is on. When programming the
Proximity and Sensitivity controls the LED flashes red in groups
of 1, 2, or 3 flashes to indicate the chosen setting. Once the LED
stops flashing the value is set. When programming the FBX and
IR gate controls the LED flashes amber to indicate FBX setup
status and IR gate status.
14