Table of Contents
Advertisement
Installing the Phantom
Handheld microphones
(Refer to Figure 5 on next page)
1. Mute the audio channel for the handheld microphone you
have selected to use with the Phantom. Remove the audio
cable from the mic.
2. Plug the Phantom (PMR-HH1) into the microphone as
shown at right, and reconnect the audio cable.
3. The Infrared sensor is built into this version of the
Phantom. Orient the microphone in the holder so the IR
sensor is on top, as shown at right.
4. Activate (un-mute) the mic and check for normal audio
operation. Turn to page 14 and begin the Setup Procedure.
12
HH
TM
Advertisement
Table of Contents
