Advertisement
CORDLESS
SCREWDRIVER
TORCH
3.6V Lithium Ion
INSTRUCTION MANUAL
SPECIFICATIONS
Voltage:
3.6V
Chuck Size:
6.35mm Magnetic
No Load Speed:
180/min
Torque Settings:
9
Max Torque:
3.5Nm
Battery:
1.5Ah Li-ion
Charge Time:
3 - 5Hours
Weight (tool only):
0.4kg
ozito.com.au
WHAT'S IN THE BOX
Cordless Screwdriver
Docking Station
Driver Bits x 24
USB Charging Cable
SDL-5000
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ozito SDL-5000
Summary of Contents for Ozito SDL-5000
- Page 1 INSTRUCTION MANUAL Docking Station SPECIFICATIONS Voltage: 3.6V Chuck Size: 6.35mm Magnetic No Load Speed: 180/min Driver Bits x 24 Torque Settings: Max Torque: 3.5Nm Battery: 1.5Ah Li-ion Charge Time: 3 - 5Hours Weight (tool only): 0.4kg ozito.com.au USB Charging Cable SDL-5000...
-
Page 2: Know Your Product
KNOW YOUR PRODUCT SETUP & PREPARATION CORDLESS SCREWDRIVER / TORCH 1. CHARGING 1 Bit Holder 7 On / Off Trigger 2 Torque Collar 8 USB Charging Point Charging the Screwdriver / Torch 3 LED Work Light 9 Charge Indicator 1 Remove the USB charging 4 Forward / Reverse Lever 10 Torch On/Off Switch adaptor from the base of the... - Page 3 2. DOCKING STATION 3. CHANGING DRIVER BITS Inserting Driver Bits Charging with the Docking Station The docking station allows neat and tidy storage of the screwdriver bits, 1 Insert the CRV bit directly into while ensuring your screwdriver is always charged and ready to go. the magnetic bit holder.
-
Page 4: Operation
OPERATION 4. CONTROLS On/Off Trigger Screwdriving LED Worklight 1 To start driving, squeeze the The screwdriver features a on/off trigger. worklight that will help brighten the work area. This light will automatically turn on once the on/ off trigger is pressed. 2 To stop driving, Using the Torch Function release the on/off... - Page 5 5 Fasten the screw 2 Rotate the handle into the work anti-clockwise piece. until it clicks into position. Note: Do not force the screwdriver or apply side pressure to elongate the hole. Let the screwdriver do the work. SDL-5000...
-
Page 6: Troubleshooting
The tools battery may be depleted. Charge the tool using the USB charger Blow out the ventilation slots with compressed air periodically . provided. Note: Ozito Industries will not be responsible for any damage or The Handle Is Not Rotating injuries caused by repair of the screwdriver by an unauthorised person or by mishandling of the tool. - Page 7 3-19 How To Order Available spare parts can be ordered through the Special Orders Desk at any Bunnings Warehouse. If you have any further questions, please contact Ozito Customer Service on: Australia: 1800 069 486 New Zealand: 0508 069 486...
-
Page 8: Description Of Symbols
DESCRIPTION OF SYMBOLS BATTERY AND CHARGER SAFETY WARNINGS THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR YOUR BATTERY CHARGER. Volts Hertz • To reduce risk of damage to the electric plug and cord, pull by the plug rather than the cord when disconnecting the charger. -
Page 9: Screwdriver Safety Warnings
GENERAL POWER TOOL SAFETY WARNINGS - PERSONAL SAFETY WARNING! Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves Read all safety warnings and all instructions. Failure to follow the warnings and away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. instructions may result in electric shock, fire and/or serious injury. -
Page 10: Warranty
• Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. OZITO 0316 Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
Need help?
Do you have a question about the SDL-5000 and is the answer not in the manual?
Questions and answers