Panasonic HC-X1 Operating Instructions Manual page 43

Problem
The unit arbitrarily stops
recording.
Color or brightness of the
image changes, or you
may see horizontal bars in
the image.
The LCD monitor flickers
indoors.
Problem
Scenes/still pictures
cannot be played back.
Please refer to "Operating Instructions (PDF format)" for details.
Recording
≥ Use an SD card that can be used for motion picture recording.
(l 23)
≥ The recordable time may have shortened due to the
deterioration of the data writing speed or repeated recording
and deletion. Using the unit, format the SD card. (l 29)
≥ Color or brightness of the image may change, or you may see
horizontal bars in the image when the object is recorded
under fluorescent light, mercury light or sodium light, etc., but
this is not a malfunction.
≥ Change settings as follows:
j Set this unit to Auto Shutter Mode.
j Adjust the shutter speed to 1/50, 1/60 or 1/100.
≥ Adjust the Synchro Scan shutter speed.
Playback
≥ Any scenes/still pictures where the thumbnails are displayed
as cannot be played back.
≥ In most cases,
j Scenes recorded with another device or edited with editing
software
j Scenes with damaged data
≥ The thumbnails of scenes with a different system frequency
are indicated with
the [SYSTEM FREQ] setting. (l 29)
Check points
Check points
is displayed for the following scenes:
. You can play them back by changing
43
DVQX1102