Recording Motion Picture; Switching Between Auto And Manual Mode - Panasonic HC-X1 Operating Instructions Manual

Recording

Recording motion picture

≥ Before turning on this unit, open the lens cover. (l 17)
1
Change the mode to
Recording Mode. (l 25)
≥ Extract the LCD monitor.
2
Press the recording start/
stop button B to start
recording.
A When you begin recording, REC
(red) is displayed.
≥ Recording will stop when you press
the recording start/stop button again.
Recording
Switching between Auto and Manual
Mode
≥ When the following settings are automatically adjusted in Auto Mode, the corresponding Manual
Mode settings are canceled:
j Focus (l 32)
j Iris (l 33)
∫ Controls that are disabled in Auto Mode
Certain controls of this unit may be disabled in Auto Mode. Controls to be disabled vary by the
[AUTO SW] menu settings.
30
DVQX1102

REC
MANU
AUTO/MANU switch
Slide the switch to change Auto Mode/
Manual Mode.
≥
≥ In Auto Mode, this unit operates according
to the [AUTO SW] menu settings.
j GAIN (l 33)
j Shutter speed (l 33)
is displayed in the Auto Mode.

ON
OFF