Attaching The Eye Cup - Panasonic HC-X1 Operating Instructions Manual

∫ Opening/closing the lens cover
You can open/close the lens cover by sliding the lens cover open/close lever.
≥ When this unit is not in use, close the lens cover to protect the lens.
≥ Do not press the lens cover hard. This may damage the lens or the lens cover.
≥ Depending on the various filters or the MC protector attached to the front side of this unit's lens,
you may not be able to open/close the lens cover or attach the lens hood.
∫ Adjust the length of the hand strap so that it fits your hand.
Adjust the hand strap according to the size of your hand.
≥ If you find it difficult to fasten the buckle B, move the pad A forward, and fasten the buckle B
again.

∫ Attaching the eye cup

1 Align the mounting mark on the eye cup mount with the corresponding mark on
the eyecup.
2 Attach the eye cup so that the notch on the eye cup mount is aligned with the
protrusion inside the eye cup.

≥ Push the eye cup in until it reaches the mounting mark. (D)
OPEN
CLOSE


1 Open the buckle.
2 Pull the end of the belt.


 
A Mounting marks
B Notch
C Protrusion

17
DVQX1102