Inserting/Removing The Battery; Charging And Recording Time - Panasonic HC-X1 Operating Instructions Manual

4k video camera
Hide thumbs Also See for HC-X1:
Table of Contents

Advertisement

Inserting/removing the battery

Install the battery by inserting it in the
direction shown in the figure.
≥ Insert the battery until it clicks and locks.
Removing the battery
Make sure that the power switch is set to OFF and the
status indicator is turned off, and then remove by holding
onto it taking care not to drop. (l 25)
While pressing the battery release button, remove
the battery.

Charging and recording time

Charging/Recording time
Battery model
number
Supplied battery/
AG-VBR59 (optional)
≥ The above charging times apply when the supplied battery charger is used.
≥ The times given apply when the ambient operating temperature is 25 oC and the relative
operating humidity is 60%. Charging time may be longer at other temperatures and humidity
levels.
≥ The continuous recordable time given applies under the conditions below. The time becomes
shorter under other conditions.
j The LCD monitor is open
j A cable is not inserted to the external output terminal
≥ "h" is an abbreviation for hour, "min" for minute and "s" for second.
≥ These times are approximations.
≥ The indicated charging time is for when the battery has been discharged completely.
Charging time and recordable time vary depending on the usage conditions such as high/
low temperature.
Voltage/Capacity
(minimum)
7.28 V/5900 mAh
System
Charging
Frequency setting
time
(l 29)
59.94 Hz
3 h 20 min
50.00 Hz
Continuously
recordable time
3 h 25 min
3 h 35 min
21
DVQX1102

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents