Table of Contents
Advertisement
Warning
beeping
sound
When operating correctly: I beep
When the memory is full 20 units of pattern: 3-short beeps
When operating incorrectly: 3-short beeps
When the sewing machine is in trouble and can't sew: 3-short beeps
It means that the thread is twisted or jammed and the hand wheel axte can't move. Please refer
to the "Trouble shooting guide" on pages 75 & 76 for solutions. After the problem has been
solved, the machine will continue to sew.
Return bobbin winder shaft to left
If the bobbin winder shaft is positioned to the
right (engaged) and any button is pressed a 3-
beep warning wilt be sounded. Move bobbin
winder shaft to the left (disengaged) to allow
the buttons to be operational.
_'_ :_Please Note: If the problem is not resolved, please contact SINGER at www.singer.com.
!..........................................................................................................................................................................................................................................................................................................................................................................................................................................
Attention:
If the thread gets jammed inside the hook during sewing, stopping the needle
from moving, the security switch will stop the machine completely. In order to restart the
sewing machine, you will have to turn the on/off switch to the OFF position and then ON
again.
7/
Advertisement
Table of Contents
