Table of Contents
Advertisement
_
Position the fabric so that the needle is 2mm
(1/1 6 inch) in front of the area to be darned,
and then lower the presser foot lever.
C;_"?_;;_::::
Please Note: When lowering the presser foot,
do not push in the front of the presser foot,
otherwise the darning will not be sewn with
the correct size.
0
Pass the upper thread down through
the
hole in the presser foot.
Pull down the
buttonhole
lever. The buttonhole
lever is
positioned
behind
the
bracket
on
the
buttonhole foot. Gently hold the end of the
upper thread in your left hand, and then
start sewing.
Please
Note:
When
you
select
any
buttonhole pattern or darning pattern, the
LCD screen will display the figure " _ " to
remind you to lower the buttonhole lever.
.... T I b
_
Darning stitches are sewn from the front of
the presser foot to the back, as shown.
_lf
the area to be sewn is large,
sew
you may
several times across the area to achieve the
desired result.
8
46
Advertisement
Table of Contents
