Table of Contents
Advertisement
Making
corded buttonholes
When sewing corded
buttonholes,
hook a heavy thread or cord under the buttonhole
foot.
D
Attach the buttonhole foot and hook the
gimp thread onto the back of the presser
foot. Bring the two gimp thread ends to the
front of the foot and insert them into the
grooves, then temporarily
tie them there.
Lower the presser foot and start sewing.
Set the stitch width to match the diameter of
the gimp thread.
_Once
sewing is completed, pull the gimp
thread gently to remove any slack, then trim
off any excess.
,_
Please Note: It is suggested that you use interfacing on the backside of the fabric.
42
Advertisement
Table of Contents
