Table of Contents
Advertisement
¸¸¸¸¸i
Attention:
Turn power switch of off
("0") position when carrying out any
of the operations shown below.
_
Attaching the
foot ho|der
presser
Raise the presser foot bar (a) by raising
the presser foot lifter. Attach the presser
foot holder (b) as illustrated.
G
Attaching the presser foot
Lower the presser foot holder (b) until
the cut-out (c) is directly above the pin
(d).
Raise the lever (e).
Lower the presser foot holder (b) and
the
presser
foot
(f)
will
engage
automatically.
¸¸¸¸,3 )
_
emoving the presser foot
Raise the presser foot.
Raise the lever (e) and the foot will
disengage.
g
_
ttaching
the edge/guilting
guide
The edge/quilting
guide (g) can be
attached
as
illustrated.
Adjust
as
needed for hems, pleats, quilting, etc.
¸¸¸¸¸4 )
2O
Advertisement
Table of Contents
