Camera Settings; Camera Channel; Ptz Protocol - Konig SEC-DVRMON30 Manual

15" monitor with dvr

Hide thumbs Also See for SEC-DVRMON30:

Table of Contents

5.4 Camera Settings

The third tab in the Settings window is Camera. You can easily customize settings for your

PTZ/standard cameras, as well as setup ad hoc values for quality, motion detection and privacy

areas. Please follow the description below.

This option allows you to select the camera (channel) number whose settings you want to

modify. If you want the changes to apply to all available channels, you need to select "All".

Make the selection by pressing the arrow buttons; the options run in a loop: 1  2  3  4

 All  1, etc.

Note: When making changes to PTZ camera functionality /

settings, make sure that these changes are being made to actual

PTZ cameras by selecting the correct number in the previous

field (Camera Channel).

Select the PTZ device protocol. It must be consistent with the protocol of the actual PTZ

cameras installed. You can make the choice among four available options: Pelco-D, Pelco-P,

Panasonic, and Samsung. The changes will take effect after you save and exit.

- 39 -

Table of Contents