Event Handling; Event Handling: Alarm E-Mail - Konig SEC-DVRMON30 Manual

15" monitor with dvr

Hide thumbs Also See for SEC-DVRMON30:

Table of Contents

5.6.3 Event Handling

The Event Handling feature has five options:

RECORD:

PTZ PRESET:

ALARM OUT: Setting the triggered alarm output (ON or OFF options).

BUZZER:

UPLOAD:

To open the next page press the Advanced Settings button in the bottom right corner of

the Alarm Tab window.

If you want an email to be sent to the chosen recipients, check this option by clicking on

Alarm  Advanced Settings E-Mail button. For information on how to set up e-mail

lists, please refer to Section 5.5.12 E-Mail Settings under the Net Tab.

Allows you to set the channel which will start recording once an alarm is

activated. (Choice of 1 to 4, multiple channels can be selected)

Setting PTZ behavior after an alarm is triggered. Only preset point 1 can

be triggered (Choice of Channel 1 to 4, multiple channels can be selected).

Setting the internal buzzer behavior after an alarm is triggered (ON or

OFF options).

Setting the option for sending information about an alarm to the center.

Note 1: before setting alarm triggered record, please set up the record

schedule in Record Schedule.

Note 2: if you want to set alarm triggered PTZ, please ensure preset

point is set and proper PTZ channel number is selected (only preset 1

can be selected)

- 53 -

Table of Contents