Copy Value Block - ACS ACR3x mobile Reference Manual

9.2.7.

Copy Value Block

The Copy Value Block command is used to copy a value from a value block to another value block.
Copy Value Block APDU Format (7 bytes)
Command
Value Block Operation
Where:
Source Block Number
Target Block Number
Copy Value Block Response Format (2 bytes)
Response
Result
Copy Value Block Response Codes
Results SW1 SW2
Success
Error
Examples:
//Store a value 1 into block
APDU = {FF D7 00
//Read a value into block
APDU = {FF B1 00
//Copy the value from value block
APDU = {FF D7 00
//Increment the value
APDU = {FF D7 00
ACR3x – Reference Manual
Version 1.03
Class INS
FFh D7h
1 byte.
The value of the source value block will be copied to the target
value block.
1 byte.
The value block to be restored.
The source and target value blocks must be in the same sector.
Data Out
SW1 SW2
90 00h The operation was completed successfully.
63 00h The operation failed.
05h
05 05 00 00 00 00 01}
05h
05 04}
05h to value block
05 04 02 03 06}
block 05h by 5
05 05 01 00 00 00 05}
P1 P2
Source Block
00h
Number
Meaning
06h
Lc Data In
Target Block
02h 03h
Number
Page 66 of 77
info@acs.com.hk
www.acs.com.hk