8.0. Contact Card Commands
This section contains the memory card command set for ACR32.
8.1. Memory Card – 1, 2, 4, 8, and 16 kilobit I2C Card
8.1.1.
SELECT_CARD_TYPE
This command powers down and up the selected card inserted in the card reader and performs a card
reset.
Note: This command can only be used after the logical smart card reader communication has been
established using the SCardConnect( ) API. For details of SCardConnect( ) API, please refer to
PC/SC specification.
Command Format
CLA
INS
FFh
A4h
Response Data Format
SW1
SW2
Where:
SW1 SW2 = 90 00h if no error
8.1.2.
SELECT_PAGE_SIZE
This command chooses the page size to read the smart card. The default value is 8-byte page write. It
will reset to default value whenever the card is removed or the reader is powered off.
Command Format
CLA
INS
FFh
01h
Where:
Page size
ACR3x – Reference Manual
Version 1.03
Pseudo-APDU
P1
P2
Lc
Card Type
00h
00h
01h
01h
Pseudo-APDU
P1
P2
Lc
Page Size
00h
00h
01h
= 03h for 8-byte page write
= 04h for 16-byte page write
= 05h for 32-byte page write
= 06h for 64-byte page write
= 07h for 128-byte page write
Page 18 of 77
info@acs.com.hk
www.acs.com.hk