Remote Commander (Supplied) - Sony EVI-HD1 Operating Instructions Manual

B Switch 2 (Communication baud
rate selector)
Set to ON for 38400 bps, or OFF for
9600 bps.
Note
Set the communication baud rate before
turning on the power. If you set the
communication baud rate after turning
on the power, the setting is ignored.
C Switch 3 (Not used)
Be sure to set this switch to OFF.
D Switch 4 (Not used)
Be sure to set this switch to OFF.
Remote Commander
(supplied)
)
A CAMERA SELECT buttons
Press the button corresponding to the
camera you want to operate with the
Remote Commander.
The camera number can be set using the
IR SELECT switch on the rear of the
camera.
Note
If two or more cameras are adjacent and
have the same camera number, they are
operated simultaneously with the same
Remote Commander. When you install
the cameras close to each other, set
different camera numbers.
For the camera number setting, see
"Operating Multiple Cameras with the
Remote Commander" (page 68).
B FOCUS buttons
Used for focus adjustment.
Press the AUTO button to adjust the
focus automatically. To adjust the focus
manually, press the MANUAL button,
and adjust it with the FAR and NEAR
buttons.
C DATA SCREEN button
Press this button to display the main
menu. Press it again to turn off the menu.
If you press the button when a lower-
level menu is selected, the display goes
back to a higher-level menu.
Note
Pan/tilt operations are disabled when the
menu is displayed.
D PAN-TILT buttons
Press the arrow buttons to perform
panning and tilting. Press the HOME
button to face the camera back to the
front.
When the menu is displayed, use V or v
to select the menu items and B or b to
change the set values. The selected
setting menu is displayed, by pressing
the HOME button when the main menu
is displayed.
E L/R DIRECTION SET button
Hold down this button and press the
REV button to change the direction of
the camera movement opposite to that
indicated by the arrow of the B/b
buttons.
To reset the direction of the camera
movement, press the STD button while
holding down this button.
Location and Functions of Parts and Controls
55