Operation Using The Supplied Remote Commander; Before Operating; Turning On The Power - Sony EVI-HD1 Operating Instructions Manual

Operation Using the Supplied Remote Commander

B

Before Operating

Before operating the camera, check
that the camera and peripheral devices
are properly installed and connected.
For details, see "Installing the Camera"
(page 71) and "Connections" (page 72).
Notes
• The supplied Remote Commander may
not work correctly near the inverter
lighting fixtures. In such a case, try to
install the camera far from the inverted
luminaire.
• You can check whether or not the installed
location is good for the usage of the
Remote Commander.
For detailed information on how to check,
refer to the Technical Manual.For detailed
information on how to get the Technical
Manual, consult with your Sony dealer.
Turning on the
Power
DC IN 12V
to AC outlet
POWER lights.
1
Connect the camera to an AC outlet
using the supplied AC power adaptor
and power cord.
The power is turned on and the POWER
lamp lights.
The camera will automatically pan and
tilt and be reset to the position stored in
POSITION 1 (Pan/tilt reset action).
2
Turn on the peripheral devices.
To turn on/off the camera using the
Remote Commander
As long as the camera is connected to an AC
outlet, you can turn the camera on or off with
the POWER switch on the Remote
Commander.
When you turn the power off using the
Remote Commander, the POWER lamp
Before Operating / Turning on the Power
65