NOTE: No more than two offsets (four elbows) allowed. Two 45
Draft is the force which moves air from the appliance up through the chimney. The amount of draft in your chimney depends on the length of the chimney,
local geography, nearby obstructions and other factors. Too much draft may cause excessive temperatures in the appliance and may cause damage. An
uncontrollable burn or excessive temperature indicates excessive draft. Inadequate draft may cause back puffing into the room and plugging of the chimney.
Inadequate draft will cause the appliance to leak smoke into the room through appliance and chimney connector joints. Ensure the heater is installed in areas
that are not too close to neighbors or in valleys that would cause unhealthy air quality or nuisance conditions.