Care & Maintenance - Ninja BL642ME Owner's Manual

Care & Maintenance
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1 Separate/remove all parts from each other.
2 Hand Washing: Wash the containers, lids, blade
assemblies and attachments in warm, soapy water.
When washing the blade assemblies, use a dish-washing
utensil with a handle to avoid direct hand contact with
blades. Handle blade assemblies with care to avoid
contact with sharp edges. Rinse and air dry thoroughly.
Dishwasher: Containers, lids, blade assemblies and
attachments are all dishwasher safe. The lids and blade
assemblies are top rack dishwasher safe. Ensure that
the blade assemblies are removed from the containers
before placing in the dishwasher.
WARNING: Handle the Blade Assemblies with
care when washing, as the blades are sharp.
Contact with the blades' edges can result in
laceration.
3
Wipe the motor base clean with a damp cloth.
Please contact customer service if any servicing needs to be
performed on the appliance at support@ninjakitchenme.com
HOW TO STORE
1 Store the Nutri Ninja
™
AUTO-iQ Technology upright with the blade assembly
™
inside the corresponding container with the lid secured
on top. Do not place anything on top. Store the rest of
the attachments in a safe place where they will not be
damaged and won't cause harm.
RESETTING THE MOTOR THERMOSTAT
Store the Nutri Ninja
™
AUTO-iQ Technology features a unique safety system
™
which prevents damage to the unit's motor and
drive system should you inadvertently overload your
appliance. If the appliance is being overloaded,
the motor will stop. Allow the appliance to
cool for approximately 15 minutes. To reset the
appliance, follow the resetting procedure below:
1 Unplug the appliance from the electrical outlet.
2
Remove and empty the container and ensure that no
food is jamming the blade assembly.
3
Allow the appliance to cool for approximately 15
minutes.
4
Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5
Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.
|
Ninja Blender Duo with
™ ™
|
Ninja Blender Duo with
™ ™
www.ninjakitchenme.com 12