Assembly And Use For The Nutri Ninja Cups - Ninja BL642ME Owner's Manual

Assembly and Use for the Nutri Ninja
WARNING: Handle the Pro Extractor Blades
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be
damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Pro Extractor Blades
ingredients have the potential to expand after blending resulting in excessive pressure buildup that can
pose a risk of injury.
ASSEMBLY
or or
Fig. 2
IMPORTANT: When processing soft dry ingredients
such as day-old bread or cheese use quick, short 1
second pulses. Do not overfill to avoid overheating the
appliance. Allow the appliance to cool after each use.
NOTE: Nutri Ninja | Ninja
Technology can sense which jar is on the motor base. The
available function lights will illuminate depending on which jar
is placed on the motor base. (Fig. 1)
1 Review warning and caution statements above
before proceeding to number 2.
2
Place the motor base on a clean, dry, level surface such as a
counter or table top. Press down on the motor base to make
sure that the suction cups adhere to the counter or table top.
3
Add ingredients to the Nutri Ninja cup.
4 Place the Pro Extractor Blades Assembly onto the cup and
tightly screw it on clockwise until you have a good seal.
(Fig. 2)
5
Turn the Nutri Ninja cup upside down and place it onto the
motor base, aligning the tabs on the cup with the motor base.
Rotate the Nutri Ninja cup clockwise until it locks in place, you
will hear a click when the lock is engaged. (Fig. 3)
6 Press the power button on, and select the speed or Auto-iQ
program that suits your needs. (Fig. 4) The Auto-iQ program
will stop the appliance automatically at the end of the
program.
Fig. 1
Fig. 3
Blender Duo with Auto-iQ
™
Cups
™
Assembly with care, as the blades are sharp.
™
Assembly from the cup upon completion of blending. Some
™
USE
Fig. 4
7 To pause the appliance, press the selected speed or Auto-iQ
program a second time. When the program is paused, the
light on the program button will flash until you press it again
to resume the rest of the program.
8
Once you have reached your desired consistency, stop the
™
appliance by pressing the power button and wait for the Pro
Extractor Blades Assembly to stop turning. Turn the Nutri
Ninja cup anticlockwise and pull straight up to remove.
™
(Fig. 5, Fig. 6)
NOTE: Do not overfill! To avoid spilling, do not add ingredients
past the "MAX" fill line.
9 Turn the cup upright and remove the Pro Extractor Blades
Assembly by twisting the Pro Extractor Blades Assembly
anticlockwise.
10 Place the Sip & Seal
seal and enjoy!
11 Make sure that the motor base is unplugged when not in use.
12 To release the motor base from the counter or table top, place
your hands underneath both sides of the motor base and
gently pull the unit up and towards you.
REMOVAL
AUTO
Fig. 5
lid onto the Nutri Ninja
™
www.ninjakitchenme.com
Fig. 6
cup, twist to
™
10