Assembly And Use For The Ninja Blender - Ninja BL642ME Owner's Manual

Assembly and Use for the Ninja
USE
Fig. 7 Fig. 8
NOTE: Nutri Ninja | Ninja Blender Duo with Auto-iQ
™
Technology can sense which jar is on the motor base.
The available function lights will illuminate depending
on which jar is placed on the motor base. (Fig. 6)
11 Review warning and caution statements at the top of page 8
before proceeding to number12.
12 Press the power button to turn on the unit. Select
the speed or Auto-iQ program that best suits your
needs. The Auto-iQ program will stop the appliance
automatically at the end of the program. (Fig. 7)
NOTE: Pulse ingredients for even chopping by holding
the Auto-iQ Pulse button until your desired consistency
is reached.
NOTE: Max PULSE iteration is 30 Pulses. After 30
Pulses allow 10 minutes to pass before running the
PULSE function up to an additional 30 Pulses.
13 To pause the appliance, press the selected speed or
Auto-iQ program a second time. When the program is
paused, the light on the program button will flash until
you press it again to resume the rest of the program.
14 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the Stacked Blade Assembly to stop turning.
(Fig. 8)
9
Blender - cont.
™
Fig. 6
Fig. 9
15 Turn the pitcher anticlockwise to remove and then lift
™
16 Open the pour spout cap and use the spout to empty
17 For thicker consistencies, first remove the lid by
18 Make sure that the unit is unplugged when not in use.
19 To release the motor base from the counter or table top,
REMOVAL
Fig. 10
off the base. (Fig. 9)
CAUTION: Never insert your hands in the pitcher
as the blades are sharp. Always use a spatula to
dislodge food that has stuck to the sides of the
pitcher.
liquid contents.
pressing the release button and pulling the lid handle
up to a 90 degree angle to lift lid off the pitcher. Then,
carefully remove the Stacked Blade Assembly by the
top of the shaft. Place Stacked Blade Assembly away
from the work area to avoid accidental contact. Finally,
empty contents from the pitcher. (Fig. 10)
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.
(Fig. 11)
Fig. 11