Advertisement
Using the Nutri Ninja
| Ninja
Blender Duo with Auto-iQ
™
®
PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:
WARNING: Never leave the appliance
unattended while in use.
CAUTION: DO NOT PROCESS HOT FOODS OR
HOT LIQUIDS.
CAUTION: Never remove the container while
the appliance is still running.
IMPORTANT: Never add ingredients into the
container before placing the blade in first.
IMPORTANT: Blades are not interchangeable.
IMPORTANT: DO NOT attempt to operate the
appliance without the lid on.
IMPORTANT: Never run the appliance empty.
7
CUSTOMER CARE - NZ: 0800 002 999
Technology
™
CAUTION: Blades
are not locked
in place. If using
the pour spout,
ensure the lid
is fully locked
onto the blender
pitcher.
CAUTION: Blades
are not locked in
place. If pouring
with the lid
removed, ALWAYS
remove the blade
assembly first.
CAUTION: Blade assemblies are sharp, not locked
in place and removable, handle with care. When
handling the blade assemblies, always hold them
by the shaft.
BEFORE FIRST USE
1
Remove all packaging material and labels from the
appliance.
2
Wash the lids, blender pitcher, Nutri Ninja
™
Cups and
blades in warm, soapy water with a soft cloth.
CAUTION: Handle the blade assemblies with care
when washing as the blades are very sharp.
3
Rinse and dry thoroughly.
4
The blender pitcher, Nutri Ninja
Cups, lids and blades,
™
are all dishwasher safe. It is recommended that the lids
and blades be placed on the top rack. Ensure that the
blades are removed from the containers before placing in
the dishwasher.
5
Wipe the motor base clean with a damp cloth.
Assembly and Use for the Ninja
WARNING: Never leave the appliance unattended while in use.
CAUTION: Blade assemblies are sharp, not locked in place and removable, handle with care. When
handling the blade assemblies, always hold them by the shaft.
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY
Fig. 1
AUTO
FROZEN DRINKS
SMOOTHIES
AUTO
PUREE
LOW
MED
HIGH
PULSE
AUTO
Fig. 4a
PULSE
HIGH
1
Holding the Stacked Blade Assembly by the top of the
DOUGH
LOW
SINGLE
SMOOTHIE
PUREE
FROZEN
SERVE
BLENDING
shaft, place it onto the drive gear inside the pitcher.
Ensure that the attachment is seated properly and is
standing upright. (Fig. 1)
NOTE: The blade will fit loosely on the drive gear.
2
Place the motor base on a clean, dry, level surface such
as a counter or table top.
3
Align and lower the Pitcher onto the motor base.
(Fig. 2) Handle should be aligned slightly to the right
of the "LOCK" symbol on the motor base.
AUTO
4
FROZEN DRINKS
Rotate the pitcher clockwise until it locks in place, you
SMOOTHIES
AUTO
PUREE
LOW
MED
HIGH
PULSE
AUTO
will hear a click when the lock is engaged. (Fig. 3)
5
The pitcher can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 4a, Fig. 4b)
6
Add the ingredients to the pitcher, making sure that
they do not exceed the highest measured marking line
on the side of the pitcher.
Blender
®
PULSE
HIGH
DOUGH
LOW
FROZEN
SINGLE
Fig. 2
SMOOTHIE
PUREE
BLENDING
SERVE
Fig. 3
Fig. 4b
Fig. 5a
NOTE: When blending any kind of liquids, such as
mixtures of any drinks or smoothies, do not exceed the
"MAX LIQUID" mark (2 L) on the pitcher.
NOTE: If you need to add additional ingredients while
the appliance is processing, open the pour spout cap
and pour the ingredients in through the opening.
7
Holding the lid by the handle in the upright position, place
it on top of the pitcher aligning the triangle ( ) located
on the lid with the triangle ( ) located on the pitcher's
handle. (Fig. 5a) Press the handle down until you hear
a click. The triangles on the lid and the blender handle
MUST be aligned in order for the blender to turn on.
(Fig. 5b)
8
Plug the power cord into the electrical outlet and press
the power button ( ).
IMPORTANT: As a safety feature, the power light
( ) will flash and the motor will not work if the
pitcher and lid are not installed correctly. When
the pitcher and lid are installed properly, the
power light ( ) will be solid, indicating that the
appliance is ready for use.
CUSTOMER CARE - AU: 1800 890 840
Fig. 5b
AUTO
FROZEN DRINKS
SMOOTHIES
AUTO
PUREE
LOW
MED
AUTO
HIGH
PULSE
8
Advertisement
