Table of Contents
Advertisement
GETTING STARTED
DISPLAY
EASY MENU
When entering [FUNCTION]...
ON: ZONE 1 illumination changes to white color. ;
OFF: ZONE 1 illumination remains as [COLOR SELECT] color. ( 26)
• ZONE 2 illumination changes to white color when you enter [FUNCTION],
irregardless of the [EASY MENU] setting.
• Refer to the illustration on page 25 for ZONE identification.
TUNER SETTING
DAB L-BAND *
1
ON: Receives L-BAND ensemble during digital audio reception. ; OFF: Cancels.
DAB ANT
ON: Supplies power to the DAB antenna. Selects when using the supplied
POWER
antenna. ; OFF: Does not supply power. Selects when using passive antenna
without booster. ( 36)
PRESET TYPE
NORMAL: Memorizes one station for each preset button in each band (FM1/FM2/
FM3/AM/SW1/SW2/DB1/DB2/DB3). ; MIX: Memorizes one station (digital radio or
analog radio) for each preset button, regardless of the selected band.
SYSTEM
KEY BEEP *
2
ON: Activates the keypress tone. ; OFF: Deactivates.
TDF ALARM *
2
ON: Activates the alarm if you forget to detach the faceplate when ACC is set to
OFF. ; OFF: Deactivates.
SOURCE SELECT
PANDORA SRC
ON: Enables PANDORA in source selection. ; OFF: Disables. ( 13)
BUILT-IN AUX
ON: Enables AUX in source selection. ; OFF: Disables. ( 12)
CD READ
1: Automatically distinguishes between audio file disc and music CD. ;
2: Forces to play as a music CD. No sound can be heard if an audio file disc is
played.
*
1
This feature is not supported when using the supplied DAB antenna (without L-band support).
To use this feature, separately purchase a DAB antenna (with L-band support).
*
2
Not applicable if 3-way crossover is selected.
Default: XX
F/W UPDATE
UPDATE SYSTEM/UPDATE DAB1/UPDATE DAB2
F/W UPDATE xxxx/
F/W UPDATE xxxxx/
F/W UPDATE Vxxx
FACTORY RESET
CLOCK
CLOCK DISPLAY
ENGLISH
ESPANOL
Change the crossover type
1
Press
2
Press and hold number buttons 4 and 5 to enter crossover
select.
The current crossover type appears.
3
Turn the volume knob to select "2WAY" or "3WAY", then
press the knob.
4
Turn the volume knob to select "YES" or "NO", then press the
knob.
The selected crossover type appears.
• To cancel, press and hold
• To adjust the selected crossover settings, ( 23, 24).
Caution
Select a crossover type according to how the speakers are connected
( 35). If you select a wrong type:
• The speakers may damage.
• The output sound level may be extremely high or low.
YES: Starts upgrading the firmware. ; NO: Cancels
(upgrading is not activated). For details on how to update
the firmware, visit <www.kenwood.com/cs/ce/>.
YES: Resets the settings to default (except the stored
station). ; NO: Cancels.
ON: The clock time is shown on the display even when
the unit is turned off. ; OFF: Cancels.
Select the display language for [FUNCTION] menu and
music information if applicable.
By default, [ENGLISH] is selected.
repeatedly to enter STANDBY.
.
5
ENGLISH
Hide quick links:
Advertisement
Table of Contents
