Related Manuals for Kenwood KDC-X7100DAB
Summary of Contents for Kenwood KDC-X7100DAB
- Page 1 KDC-X7100DAB CD-RECEIVER INSTRUCTION MANUAL © 2016 JVC KENWOOD Corporation B5A-1372-00 (XN)
-
Page 2: Table Of Contents
CONTENTS BEFORE USE BEFORE USE IMPORTANT • To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe BASICS Warning and Caution in this manual. GETTING STARTED • Please keep the manual in a safe and accessible place for future reference. 1 Select the display language WARNING and cancel the demonstration... -
Page 3: Basics
BASICS Faceplate Remote control (RC-406) Volume Display Lights up when Bluetooth knob window connection is established. ( 14) Remote sensor (Do not expose to bright sunlight.) Detach button Pull out the insulation sheet when using for the first time. USB 1 cable from Flashes when the unit the rear of the unit. -
Page 4: Getting Started
GETTING STARTED Set the clock and date Press the volume knob to enter [FUNCTION]. Turn the volume knob to select [CLOCK], then press the knob. To adjust the clock Turn the volume knob to select [CLOCK ADJUST], then press the knob. Turn the volume knob to make the settings, then press the knob. - Page 5 (upgrading is not activated). For details on how to update OFF: ZONE 1 illumination remains as [COLOR SELECT] color. ( 26) F/W UPDATE Vxxx the firmware, visit <www.kenwood.com/cs/ce/>. • ZONE 2 illumination changes to white color when you enter [FUNCTION], FACTORY RESET YES: Resets the settings to default (except the stored...
-
Page 6: Digital Radio
DIGITAL RADIO About DAB (Digital Audio Broadcasting) DAB is one of the digital radio broadcasting systems available today. It can deliver digital quality sound without any annoying interference or signal distortion. Furthermore, it can carry text, pictures and data. In contrast to FM broadcast, where each program is transmitted on its own frequency, DAB combines several programs (called “services”) to form one Search for an ensemble... - Page 7 DIGITAL RADIO Select a service by name PTY SEARCH 1 Turn the volume knob to select the available Program Type ( 8), then press the knob. Press to enter Service Search mode. 2 Turn the volume knob to select the PTY language (ENGLISH/FRENCH/ Turn the volume knob quickly to enter Alphabet Search mode.
-
Page 8: Analog Radio
ANALOG RADIO DIGITAL RADIO CLOCK TIME SYNC ON: Synchronizes the unit’s time to the Digital Radio signal station time. ; OFF: Cancels. Available Program Type for [PTY SEARCH] SPEECH : NEWS, AFFAIRS, INFO (information), SPORT, EDUCATE, Search for a station DRAMA, CULTURE, SCIENCE, VARIED, WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, Press repeatedly to select TUNER. - Page 9 ANALOG RADIO Other settings PTY SEARCH 1 Turn the volume knob to select the available Program Type (see the following), then press the knob. Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select the PTY language (ENGLISH/FRENCH/ Turn the volume knob to select an item (see the following table), GERMAN), then press the knob.
-
Page 10: Cd/Usb/Ipod/Android
(USB input terminal). (commercially available) When connecting an Android device, “Press [VIEW] to install KENWOOD MUSIC PLAY APP” is shown. Follow the instructions to install the application. You can also install the latest version of KENWOOD MUSIC PLAY application on your Android device before connecting. For more information, visit <www.kenwood.com/cs/ce/>. - Page 11 While in ANDROID 1/ANDROID 2 source, press 5 repeatedly. source) BROWSE MODE : Control Android device from this unit via KENWOOD Press S / T to search at a preset skip search ratio. ( 12, MUSIC PLAY application installed in the Android device.
-
Page 12: Aux
KENWOOD Remote application is designed to control the KENWOOD car receiver’s operations from the iPhone/iPod (via USB input terminal). Preparation: Auxiliary cable from the rear Install the latest version of KENWOOD Remote application on your device of the unit before connecting. For more information, visit <www.kenwood.com/cs/ce/>. Press repeatedly to select AUX. -
Page 13: Pandora
Pandora® Preparation: Create and save a new station Install the latest version of the Pandora application on your device (iPhone/iPod touch), then create an account and log in to Pandora. Press • Select [ON] for [PANDORA SRC] in [SOURCE SELECT]. ( 5) Turn the volume knob to select [NEW STATION], then press the knob. -
Page 14: Bluetooth
BLUETOOTH® Pandora® BLUETOOTH — Connection Delete a station Supported Bluetooth profiles Supported Bluetooth codecs While listening to PANDORA 1/PANDORA 2... – Hands-Free Profile (HFP) – Sub Band Codec (SBC) Press – Advanced Audio Distribution Profile (A2DP) – Advanced Audio Coding (AAC) Turn the volume knob to select –... - Page 15 – Bluetooth function of the connected device is turned on. – [AUTO PAIRING] is set to [ON]. ( 19) – KENWOOD MUSIC PLAY application is installed on the Android device ( 10) and [BROWSE MODE] is selected. ( 11) • Depending on the type of remote device used, the strength of the NFC signal may vary.
- Page 16 BLUETOOTH® BLUETOOTH — Mobile phone The following operations may differ or not available depending on the connected phone. On the faceplate On the remote control First incoming call..Answer a call Press or the volume knob Press or one of the number buttons (1 to 6).
- Page 17 BLUETOOTH® Improve the voice quality Make a call While talking on the phone... You can make a call from the call history, phonebook, or Press the volume knob to enter [FUNCTION]. dialing the number. Call by voice is also possible if your Turn the volume knob to select an item (see the following table), then press mobile phone has the feature.
- Page 18 BLUETOOTH® Make a call using voice recognition PHONE BOOK (Applicable only if the phone supports PBAP.) 1 Turn the volume knob quickly to enter alphabet search mode (if the Press and hold to activate the voice recognition of the phonebook contains many contacts). connected phone.
-
Page 19: Bluetooth Settings
BLUETOOTH® Other settings Bluetooth test mode Press the volume knob to enter [FUNCTION]. You can check the connectivity of the supported Turn the volume knob to select an item (see the following table), then press the knob. profile between the Bluetooth device and the unit. Repeat step until the desired item is selected/activated or follow the instructions •... - Page 20 Press (via Bluetooth). Select group or folder Press J / K. Press Preparation: Install the latest version of KENWOOD Remote application on your Reverse/Forward skip Press S / T. Press S / device before connecting. For more information, visit Reverse/Fast-forward Press and hold Press and hold <www.kenwood.com/cs/ce/>.
- Page 21 BLUETOOTH® Default: XX Listen to iPhone/iPod via Bluetooth REMOTE APP You can listen to the songs on the iPhone/iPod via Bluetooth on this unit. Press repeatedly to select iPod BT. SELECT Select the device (IOS or ANDROID) to use the application. •...
-
Page 22: Audio Settings
AUDIO SETTINGS While listening to any source... PRESET EQ NATURAL/ROCK/POPS/EASY/TOP40/JAZZ/POWERFUL/USER: Press AUDIO to enter [AUDIO CONTROL] directly. Selects a preset equalizer suitable to the music genre. (Select [USER] to use the Turn the volume knob to select an item (see the following settings made in [MANUAL EQ].) table), then press the knob. - Page 23 AUDIO SETTINGS 2-way crossover setting items DTA SETTINGS For settings, 24, Digital Time Alignment Settings. CAR SETTINGS SPEAKER SIZE FRONT SIZE 8CM/10CM/12CM/13CM/16CM/17CM/18CM/4×6/ 5×7/6×8/6×9/7×10 Crossover settings TWEETER SMALL/MIDDLE/LARGE/NONE (not connected) Below are the available setting items for 2-way crossover and 3-way REAR 8CM/10CM/12CM/13CM/16CM/17CM/18CM/4×6/5×7/6×8/6×9/7×10/ crossover.
- Page 24 AUDIO SETTINGS 3-way crossover setting items Digital Time Alignment settings Digital Time Alignment sets the delay time of the speaker output to SPEAKER SIZE create a more suitable environment for your vehicle. TWEETER SMALL/MIDDLE/LARGE • For more information, 25, Determining the value for [DISTANCE] and [GAIN] MID RANGE 8CM/10CM/12CM/13CM/16CM/17CM/18CM/4×6/5×7/6×8/6×9 of [DTA SETTINGS].
-
Page 25: Display Settings
DISPLAY SETTINGS AUDIO SETTINGS • Before making an adjustment for [DISTANCE] and [GAIN] of [DTA SETTINGS], select the speaker you want to adjust: When 2-way crossover is selected: FRONT LEFT/FRONT RIGHT/REAR LEFT/REAR RIGHT/SUBWOOFER – You can only select [REAR LEFT], [REAR RIGHT] and [SUBWOOFER] if a setting other than [NONE] is selected for [REAR] and [SUBWOOFER] of [SPEAKER SIZE]. -
Page 26: References
2 LEVEL 0 to LEVEL 31: Select your preferred brightness level for the For: – Latest firmware updates and latest compatible item list selected zone. – KENWOOD original application – Any other latest information TEXT SCROLL AUTO/ONCE: Select whether to scroll the display information automatically, Visit <www.kenwood.com/cs/ce/>. - Page 27 – iPhone 4S, 5, 5S, 5C, 6, 6 Plus, 6S, 6S Plus, SE • You cannot operate iPod if “KENWOOD” or “ ” is displayed on iPod. • Depending on the version of the operating system of the iPod/iPhone, some functions may not operate on this unit.
- Page 28 REFERENCES Change the display information Each time you press DISP, the display information changes. • If the information is unavailable or not recorded, “NO TEXT”, “NO INFO”, or other information (eg. station name, playing time) appears. Source name Display information Source name (Date) * STANDBY DIGITAL AUDIO...
-
Page 29: Troubleshooting
TROUBLESHOOTING Symptom Remedy Symptom Remedy Sound cannot be heard. • Adjust the volume to the optimum level. “READING” keeps flashing. Do not use too many hierarchical levels or folders. • Check the cords and connections. Elapsed playing time is not This is caused by how the tracks are recorded. - Page 30 ( 27) No Bluetooth device • Search from the Bluetooth device again. Cannot playback at • Make sure KENWOOD MUSIC PLAY APP is installed on the is detected. • Reset the unit. ( 3) [BROWSE MODE].
-
Page 31: Specifications
SPECIFICATIONS TROUBLESHOOTING DAB Frequency Range Band III 174.928 MHz — 239.200 MHz Symptom Remedy Sensitivity –100 dBm Voice calling method is • Use voice calling method in a more quiet environment. not successful. • Reduce the distance from the microphone when you speak Signal-to-Noise Ratio 90 dB the name. - Page 32 SPECIFICATIONS Laser Diode GaAIAs Version Bluetooth 3.0 Digital Filter (D/A) 8 times over sampling Frequency Range 2.402 GHz — 2.480 GHz Spindle Speed 500 rpm — 200 rpm (CLV) Output Power +4 dBm (MAX), 0 dBm (AVE) Power Class 2 Wow & Flutter Below measurable limit Maximum Communication Range Line of sight approx.
-
Page 33: Installation/Connection
INSTALLATION/CONNECTION SPECIFICATIONS Warning Frequency Response (±3 dB) 20 Hz — 20 kHz • The unit can only be used with a 12 V DC power supply, negative ground. Input Maximum Voltage 1 000 mV • Disconnect the battery’s negative terminal before wiring and mounting. • Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire (black) to Input Impedance 30 kΩ... - Page 34 INSTALLATION/CONNECTION Installing the unit (in-dash mounting) Part list for installation (A) Faceplate Do the required wiring. ( 35) Hook on the top side (B) Trim plate Orientate the trim plate as Dashboard of illustrated before fitting. your car Bend the appropriate tabs to hold the (C) Mounting sleeve mounting sleeve firmly in place.
-
Page 35: Usb Rating For The Usb Cable From The Rear Of The Unit Is Indicated On A Label. ( 35)
For 3-way crossover: Mid range speaker (left) Gray To front speaker (right)/ Brown Gray/Black For 3-way crossover: Mid range speaker (right) To connect the Kenwood navigation (Mute control wire) Green system, refer your navigation manual To rear speaker (left)/ Green/Black... - Page 36 INSTALLATION/CONNECTION Installing the DAB antenna Determine the antenna installation position Connect the supplied DAB antenna to the DAB antenna jack. ( 35) • The direction of the film antenna (F) changes depending on whether the film antenna (F) is installed on the right side or left side.
- Page 37 INSTALLATION/CONNECTION Clean the windscreen with the supplied Caution Installation overview cleaner (I). When installing the antenna cable inside the front The antenna should be installed on the passenger side pillar with the air bag installed for safety. • The front pillar cover is secured with a special clip which may need to be replaced when it is removed.
- Page 38 INSTALLATION/CONNECTION Rub the film antenna gently onto the Set the position of the protrusion of the Remove the film covering the earth sheet amplifier unit (G) with the K mark on the windscreen in the direction of the arrow and paste the earth sheet on the metal shown to allow it to stick firmly.
- Page 40 • The “AAC” logo is a trademark of Dolby Laboratories. • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners.