Kenwood KDC-X7100DAB Instruction Manual page 20

BLUETOOTH®
BLUETOOTH — Audio
While in BT AUDIO
source, you can
connect to five
Bluetooth audio
devices and switch
between these five
devices.
Audio player via Bluetooth
1 Press repeatedly (or press SRC on the remote control) to select
BT AUDIO.
2 Operate the Bluetooth audio player to start playback.
To On the faceplate
Playback/pause
Press
Select group or folder Press J / K.
Reverse/Forward skip Press S / T.
Reverse/Fast-forward Press and hold
S / T.
Repeat play Press
ALL REPEAT, FILE REPEAT,
REPEAT OFF
Random play Press and hold
select ALL RANDOM.
• Press
RANDOM OFF.
Select a file from a Refer to "Select a file from
folder/list a folder/list" on page 11.
20
ENGLISH
On the remote control
. Press
Press /
Press S /
Press and hold
S /
repeatedly.
( Not available )
to
( Not available )
to select
( Not available )
To
Switch between
connected Bluetooth
audio devices
* Pressing the "Play" key on the connected device itself also causes switching of sound
output from the device.
Operations and display indications may differ according to their
availability on the connected device.
Settings to use KENWOOD Remote application
KENWOOD Remote application is designed to control the
KENWOOD car receiver's operations from the iPhone/iPod
(via Bluetooth or via USB input terminal) or Android smartphone
.
(via Bluetooth).
.
Preparation:
Install the latest version of KENWOOD Remote application on your
.
device before connecting. For more information, visit
<www.kenwood.com/cs/ce/>.
.
1 Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item ( 21), then press the
knob.
3 2
Repeat step
4
Press and hold
To return to the previous setting item, press
On the faceplate On the remote control
Press 5. *
( Not available )
until the desired item is selected or activated.
to exit.
.